Table of Contents
Advertisement
22
User Guide
5. Cleaning and maintenance
Cleaning
Recommended cleaners and tools
As the tub
sponge
Never use water above 50°C in the tub.
For normal cleaning, use water or a mild non-alkali detergent.
For dissolving of limestone deposits, use a mild solution of phosphatic or citric acid (<10%).
Cleaning procedure
1. Enter the hose
2. Open the valve
3. Disconnect the drain hose
4. When empty, the tub
preferred.
5. The sealing
For correct mounting of the sealing, see
P/N 390225-C
11/2021
and lid
can easily be scratched, we recommend to use a soft brush
when cleaning the tub
into an empty container (min. 25 liters).
to drain the tub
.
can be lifted off and carried away for cleaning in a sink if
CAUTION! Make sure that the unit is placed on a stable surface when removing
the tub, as the high positioned centre of gravity can cause the unit to turn over.
can be removed and cleaned separately.
EN
Dansensor
, hole-plate
, and lid
.
"Replacement of parts" on page 26
LeakPointer H
®
.
O
2
or a
Advertisement
Table of Contents
