2.4.3 Screen Brightness
2.4.4 Firmware Update
2.4.5 Joystick Calibration
2.4.6 Information
M-HPQA-001
•
The screen brightness button leads to a screen to change the
screen brightness
•
The brightness can be set from 10 to 100 in increments of 10
•
The plus button increases brightness, and the minus button
decreases brightness
•
The firmware update button leads to a screen to update the firmware
•
The current version will be shown on the screen
•
Insert a USB drive with a valid firmware version
•
Update the firmware by tapping the circular download button on the firmware
update screen
•
The joystick calibration button leads to a screen to calibrate the joystick
•
This is set from the factory. Only perform a calibration if the joystick is not
behaving correctly or if directed by customer support
•
The play button starts calibration
•
Move the joystick and hold it at each position indicated by green
•
Calibration is complete when a checkmark popup appears
•
Unit information is shown on the settings screen
•
Serial number, firmware version, and model number are shown
H E L I PAT H Q U I C K A C T I O N L A B O R AT O R Y S TA N D - O P E R AT I O N A L M A N U A L
16