9. When the HPQA reaches the test starting position, it will automatically reverse its
direction and descend again
10. To stop the test, press the Stop button
11. To move the head up you can press the Home button
to automatically go back to those programmed locations. The P1 button will bring you
back to the top position of your last Helipath Test run. You may also use the joystick to
manually drive the head up to the desired position for spindle cleaning
3.3 Quick Action Test Run
The Helipath Quick Action laboratory stand can be used as a motorized quick action replacement for any standard
AMETEK Brookfield lab stand. Traditional Viscosity test can be run with ease with automated one touch movements.
•
Simply push on the HPQA Joystick to move the viscometer/rheometer up or down the
Upright Rod to the desired position
•
The further you push the joystick in the direction of desired travel, the faster it will go
•
Release the Joystick to stop the movement of the HPQA
•
Setup a standard viscosity test following the viscometer manual
•
Attach your desired spindle and configure your test on your
DV Viscometer or Rheometer
M-HPQA-001
H E L I PAT H Q U I C K A C T I O N L A B O R AT O R Y S TA N D - O P E R AT I O N A L M A N U A L
or Test Position 1 button
21