Installation Guide Linear Modules
4.5 Combinations
SM01 linear modules can be screwed directly together using the LinMot mounting kit (see chapter 9.3) and,
depending on the combination, the adapter plate (see chapter 9.4). Thus, any YZ combinations, as shown
below, can be realised. In addition, a classic pillar system (see chapter 9.5) is available, with which the units
can be flexibly adjusted in height if required.
The possible mounting combinations of the SM01 linear modules are as follows:
•
SM01-37 on SM01-37 (mounting kit required)
•
SM01-37x120 on SM01-48x (mounting kit required)
•
SM01-37x60 on SM01-48x (mounting kit + adapter plate required)
NTI AG / LinMot
SM01-37 / SM01-48
ENG
Page 13 / 85