Table of Contents
Advertisement
Installation Guide Linear Modules
9.5
Pillar System
To realize a YZ combination of the SM01 linear modules, LinMot offers a mounting kit for screwing the
modules together as well as a classic pillar system with which the units can be flexibly adjusted in height if
required. For improved heat dissipation, pillars with an integrated heat pipe are optionally available.
9.5.1 Pillar System for SM01-37 Linear Modules
Pos.
Item
1
Pillar adapter
2
Pillar
3
Pillar base
•
2 pieces each of position 1, 2 and 3 must be ordered.
•
If two SM01 linear modules are to be screwed together, the assembly kit "Z01-AsKit-
SM01-SM01" (
Page 42 / 85
Z01-VF-30-SSC (Item-No. 0150-4501)
Z01-SL30x400-HP-SSC
L= 400 mm, Mat. 1.4112
(Item-No. 0150-4508)
0150-4507) can be ordered. It contains all the necessary screws.
Item-No.
SM01-37 / SM01-48
Material: Stainless Steel 1.4404 / 316 L
Item-No.
Z01-SL30-25x400-SSCP
L=400 mm, Mat. 1.4404 mit Heat Pipe
(Item-No. 0150-4502)
Z01-SF-30-SSC
(Item-No. 0150-4500)
ENG
NTI AG / LinMot
Advertisement
Table of Contents
