Table of Contents
Advertisement
Installation Guide Linear Modules
5.2 Maximum Load in horizontal Mounting Position
5.2.1 SM01-37Sx60
5.2.2 SM01-37Sx60_BE01
Page 16 / 85
H = Stroke + Plate thickness
X = Distance to center of gravity
S = Center of gravity
Cantilever extension = H + X
The maximum load depends on the cantilever extension
(distance H plus distance between the center of gravity of the
working load and the mounting surface).
Cantilever extension [mm]
Cantilever extension [mm]
SM01-37 / SM01-48
ENG
NTI AG / LinMot
Advertisement
Table of Contents
