Installation Guide Linear Modules
5.3
Maximum Deflection in vertical Mounting Position
5.3.1 SM01-37Sx60
5.3.2 SM01-37Sx60_BE01
For SM01 modules with plain bearings, please note that in addition to the load-dependent
deflection, there is also a change in position due to the bearing clearance.
Page 18 / 85
H = Stroke + Plate thickness
S = Center of gravity
X = Distance to center of gravity
f = Deflection of theoretical axis
Total deflection =
Static deflection + deflection under load
(Deflection measured at standstill)
Cantilever extension [mm]
Cantilever extension [mm]
SM01-37 / SM01-48
ENG
NTI AG / LinMot