Table of Contents
Advertisement
Installation Guide Linear Modules
5 Load Data
5.1
Maximum Load in vertical Mounting Position
5.1.1 SM01-37Sx60
5.1.2 SM01-37Sx60_BE01
Page 14 / 85
H = Stroke + Plate thickness
X = Distance to center of gravity
S = Center of gravity
Cantilever extension = H + X
The maximum load depends on the cantilever extension (distance H plus
distance between the center of gravity of the working load and the
mounting surface).
Cantilever extension [mm]
Cantilever extension [mm]
SM01-37 / SM01-48
ENG
NTI AG / LinMot
Advertisement
Table of Contents
