Installation Guide Linear Modules
8.4 Front Plate / Back Plate
Front plate
The front plate, the MagSpring adapter SSC and the back plate can be ordered again if damaged. The
dimensions can be taken from chapter 12.
Ordering information
Item
SM01k-37S-FP-SSC
SM01k-37S-MA-40-SSC
SM01k-37S-RP-SSC
SM01k-37S-FP-BE01-SSC
SM01k-37S-MA-BE01-40-SSC
SM01k-37S-RP-BE01-SSC
SM01k-48-FP-SSC
SM01k-48-RP-SSC
SM01k-48-FP-BE01-SSC
SM01k-48-RP-BE01-SSC
8.4.1 Mounting the Front Plate
NTI AG / LinMot
Back plate
Front plate (MagSpring Adapter)
Description
Front plate SM01-37S-SSC Module (Linear ball bearing)
Front plate MagSpring-Adapter SSC (Linear ball bearing)
Back plate SM01-37S-SSC Module (Linear ball bearing)
Front plate SM01-37S-SSC Module (Plain bearing)
Front plate MagSpring-Adapter SSC (Plain bearing)
Back plate SM01-37S-SSC Module (Plain bearing)
Front plate SM01-48-SSCP Module (Linear ball bearing)
Back plate SM01-48-SSCP Module (Linear ball bearing)
Front plate SM01-48-BE01-SSCP Module (Plain bearing)
Back plate SM01-48-BE01-SSCP Module (Plain bearing)
1. Slide the front plate to the stop of the guide
2. Dismantle the front plate
SM01-37 / SM01-48
block.
Loosen the screws of the guide shafts and the
slider and remove the plate.
ENG
Back plate
Item-No.
0160-3176
0260-0077
0160-3177
0160-1237
0260-0031
0160-1805
0160-3109
0160-3110
0160-2959
0160-2960
Page 37 / 85