Resistance Measurement - AEMC 511 User Manual

4.5
• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and
the black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the sample
under test.
16
Shop for AEMC products online at:

Resistance Measurement

WARNING: Immediately unclamp the meter
from the conductor under test if overload "
is displayed.
WARNING: When making a resistance mea-
surement, make sure that the power is off
(dead circuit), and that all capacitors in the
measured circuit are fully discharged.
Clamp-on Meter Models 511 and 512
www.
ShopAEMC
range.
"
.com 1.888.610.7664