Resistance Measurement - AEMC 502 User Manual

4.4
• Turn the rotary range switch to the
range.
• Insert the red test lead to the red "+" input
jack and the black lead to the black "COM"
input jack.
• Bring the test probe tips into contact with the
sample under test.
12
ts Online at:

Resistance Measurement

WARNING: Immediately unclamp the
meter from the conductor under test if
overload "
WARNING: When making a resis-
tance measurement, make sure that
the power is off (dead circuit), and
that all capacitors in the measured
circuit are fully discharged.
TRMS Clamp-on Meter Model 502
GlobalTestSupply
www.
" is displayed.
.com
sales@Glo