Table of Contents
Advertisement
3. A dialog box will appear asking to confirm the erasure of instrument
memory. Select Yes to confirm or No to cancel the operation.
NOTE: Clearing the memory will also clear any alarms stored.
4.8
Data Storage
The logger captures Trend measurements.
Input Channel: Source for the measurement channel of the instrument.
Measurement Channel: Measurement of input. This can be a simple
direct measurement, the result of complex mathematical operations on a
single or multiple input, or other channels.
Sample Rate: The rate at which the instrument measures inputs.
Storage Rate: The rate at which channel measurements are stored.
4.8.1
Trend Measurements
The logger stores the TRMS calculation of each of the inputs. In addition,
the user can define the storage rate, recording period and measurement
format using the Configure Instrument dialog box in the SLII Control Panel
software. Trend measurements are stored at this fixed storage rate.
4.9
Normal Operation
When the instrument is turned ON, the following occurs (provided there is
sufficient battery voltage and no data is stored in the instrument's memory):
•
The GREEN LED single-blinks. (STANDBY mode is active and
the logger is not recording).
•
The RED LED is OFF, indicating there is no data in memory.
PRESS button is used to Start and Stop a Recording
•
The
Session.
•
If the
the instrument will enter SLEEP mode and wait for either another
button press or the recording start time to arrive (if a recording is
scheduled). While in SLEEP mode, the LEDs will not blink.
•
A button press of 0.5 seconds will return the unit back to the normal
STANDBY mode.
Simple Logger
II Model CL601
®
Shop for AEMC products online at:
PRESS button is not pressed for a period of one minute,
ShopAEMC
www.
.com
1.888.610.7664
15
Advertisement
Table of Contents
