Continuity Test - AEMC 500 User Manual

4.4

Continuity Test

• Turn the rotary range switch to the
• Insert red test lead to the red "+" input jack and the black lead to
the black "COM" input jack.
• Bring the test probe tips into contact with the sample under test.
• If the resistance is less than 35Ω, the beeper emits a continuous
sound.
• If overload "
ment range or the circuit is open.
WARNING: When testing continuity, make sure that there
is no power in the tested sample or circuit (dead circuit).
This may be checked by using the voltage functions.
MODEL 500
®
CL AMP METER
I N S T R U M E N T S
600V CAT II
400A
300V CAT III
H HOLD
Ω
V
A
OFF
COM
!
CAT II
600V
Clamp-on Meter Model 500
Shop for AEMC products online at:
" is displayed, the resistance exceeds the measure-
Short circuit with beep
ShopAEMC
www.
range.
MODEL 500
®
CL AMP METER
I N S T R U M E N T S
Open circuit no beep
600V CAT II
400A
300V CAT III
H HOLD
Ω
V
A
OFF
COM
!
CAT II
600V
.com 1.888.610.7664
11