Web Search Mode - Eneo TVR-2008AM4.0 User Manual

User's Manual
⑩ Click the
to save the current image as a bitmap or JPEG file format.
⑪ Click the
to set up the image drawing mode, OSD display and beep on/off. You can adjust the display speed
by changing the image drawing mode, select OSD information to be displayed on the screen, and turn the DVR's
internal buzzer on and off from a remote site.
⑫ The event status window at the bottom displays a list of events that were detected from the remote site.
⑬ Selecting a camera on the screen and clicking the right mouse button displays the text menu screen.
NOTE: A camera name change in the Web Watch mode does not affect the camera name set up on the remote
site. Leaving the Camera Title blank causes the camera name set up on the remote site to display.
The icon will display on each camera screen when audio communication is available between the
WebGuard system and a DVR.

Web Search Mode

WebSearch is a remote web search program that allows you to search recorded video on the remote DVR.
NOTE: The remote site connection in the Web Search mode will automatically be disconnected if there is no
activity for 30 minutes.
① Click the
to log out the WebGuard program.
② Click the
to access to the web monitoring mode.
③ Position the mouse pointer on the WebSearch logo to see the version of the WebGuard program.
84
 Change Camera Title: Changes the camera name.
 Enable Audio: Enables audio communication with the remote site. When the audio
control panel displays, click the
click the button again to stop sending audio. Click the
the connected remote site through the attached speaker and click the button again
stop monitoring live audio. Clicking both
Clicking the disables audio communication.
 Aspect Ratio: Changes the image aspect ratio.
 Anti-Aliasing Screen: Enhances image display quality by eliminating stair stepping
(aliasing) effects in the enlarged image.
to send audio to the connected remote site and
to monitor live audio from
and allows two-way communication.