Table of Contents
Advertisement
Notification Setup
Callback
The DVR can be set up to contact a computer running RAS (Remote Administration System) when an event occurs.
Highlight the box under the No. heading and press the
to change the IP addresses if No. is enabled.
Highlight the IP Address box that you want to change and press the
address of the computer you want contacted during an event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times you would like the DVR to try contacting the
computer. You can select from 1 to 10 retries.
Figure 34: Notification – Callback setup screen.
button to toggle between On and Off. You will only be able
Figure 35: Notification – Mail setup screen.
Digital Video Recorder
button. Use the arrow buttons to enter the IP
49
Advertisement
Table of Contents
