Table of Contents
Advertisement
User's Manual
Highlight the Format box beside Time and press the
the
button to save your selected format.
NOTE: The clock will not start running until you have highlighted Save and pressed the
Highlight the box beside Time Zone and press the
Highlight Use Daylight Saving Time and press the
Highlight the Holiday tab, and the Holiday setup screen appears
Figure 11 ─ Holiday setup screen.
Highlighting the Time Sync. tab causes the Time Sync. setup screen to display. You can set up time synchronization
between the DVR and standard time servers that are available in most time zones and countries, or between the DVR
and another DVR.
Figure 12 ─ Time Sync. setup screen.
Last Sync-Time displays the last time the DVR was synchronized with the time server.
Highlight Run as Server and press the
On, the DVR you are setting up will run as a time server.
12
button. Select from the three available time formats and press
button. Select your time zone from the list and press the
button. Pressing the
You can set up holidays by highlighting + and pressing the
button. The current date appears.
Highlight the month and day and change them by using the
Up and Down arrow buttons. Press the
date. Dates can be deleted by highlighting the
date and pressing the
NOTE: Holidays that do not fall on the same date each
year should be updated once the current year's holiday
has passed.
Highlight the box beside Automatic Sync. and press the
button. This toggles between On and Off.
Highlight the box beside Time Server and press the
A virtual keyboard appears that you can use to enter the IP
address or domain name of the time server.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting up the
LAN.
Highlight the box beside Interval and press the
the time interval for synchronization from 30 minutes to 1 day
at various time intervals.
button. Pressing the
button toggles between On and Off.
button.
button toggles between On and Off. When it is
button.
button.
button to add the
beside the
button.
button. Set
Advertisement
Table of Contents
