System Setup - Eneo PNR-5104 Operating Instructions Manual

Operating Instructions
Site Name: Select the NVR system to connect to from the list. If you connect to the NVR system for
the first time, click the
the NVR system to connect
 User ID, Password: Enter your user ID and password. The default user ID is admin and default password
is 12345678. You can change the user ID and password in the User menu. Refer to Chapter 13 —
User Management (p. 105) for details.
 Remember my ID on this computer: Check the box if you want to save your ID for logging on.
 Restore last Live sessions: Check the box if you want to restore the previous live monitoring sessions
in the current Live panels of the Client program (supported only for the Client program).

System Setup

Click the (System Setup) button to display the system setup screen.
Language
Date/Time
10
button at the right, select Add or Modify and enter network information of
−
Site Name, Service Address, Service Port: Designate the name
of the NVR system and enter the IP address and port number of the
NVR system (default: 11001). If the NVR system uses the DVRNS
function, check Use DVRNS and enter the IP address (domain
name) and port number of the DVRNS server that the NVR system
is registered. It allows you to enter the name instead of the IP address
of the NVR system when entering Service Address. The name you
enter should be the same as the name registered on the DVRNS server.
Refer to System Setup, DVRNS (p. 14) for details about the
DVRNS function.
Select the language in which to run the NVR system.
It is not necessary to match it to the iNEX program's
language. It is recommended to match it to the
language of text such as camera titles of devices to
be registered on the NVR system. Otherwise, text
may not be displayed properly on the iNEX program.