Toshiba GR200 Series Instruction Manual page 686

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Figure 4.1-41 LN editing screen for SBO (for example)

Defining DIR setting mode

Figure 4.1-42 exemplifies the SPOS01 logic node saved as "GGIO1501". In the DIR mode, the

following three items should be selected using GR-TIEMS:

Figure 4.1-42 LN editing screen for DIR mode (for example)

Mapping output data

The user should group the SPOS01 signals with regard to GOOSE and Report; the user should

map them for IEC 61850 communication using GR-TIEMS. Figure 4.1-43 illustrates how to

map a signal; it indicates that the signals for the SPOS01 function are required to be mapped

for IEC 61850 communication.

sboClass† (choice "operate-once")

ctlmodel (choice "SBOes or SBOns" )

†"sboClass" can be found by scrolling down.

ctlmodel (choice "DOes or DOns" )

6F2S1914 (0.49)

GRL200 (Soft 033 & 037)

Chapters

Table of Contents