Toshiba GR200 Series Instruction Manual page 747

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Figure 4.2-53 LN editing screen for SBO mode

Defining DIR mode

Figure 4.2-54 exemplifies the SPOS logic node saved as "CSWI1". In the DIR mode, the

following three items should be selected using GR-TIEMS.

Figure 4.2-54 LN editing screen for DIR mode

Mapping output data

The user should group the DPSY01 signals with regard to GOOSE and REPORT; the user

should map them for IEC61850 communication using GR-TIEMS. Figure 4.2-55 illustrates

how to map a signal; it indicates that the signals for the DPSY01 function are required to be

mapped for IEC 61850 communications.

sboClass† (choice "operate-once")

ctlmodel (choice "SBOes or SBOns")

†"sboClass" can be found by scrolling down.

ctlmodel (choice "DOes or DOns" )

6F2S1914 (0.49)

GRL200 (Soft 033 & 037)

Chapters

Table of Contents