Table of Contents
Advertisement
SERVICING YOUR OUTBOARD MOTOR
ENGINE OIL CHANGE
An engine oil evacuation/filling
device may be used to
remove/add the engine oil.
Drain the used oil while the
engine is warm. Warm oil drains
quickly and completely.
1. Unlock and remove the
engine cover (P.91).
96
SEALING WASHER (Replace)
OIL DRAIN GUIDE
DRAIN BOLT
2. Place a suitable container
below the oil drain guide to
catch the used oil, and then
remove the oil filler cap, drain
bolt, and sealing washer.
3. Allow the used oil to drain
completely. Use a new sealing
washer, and then reinstall the
engine oil drain bolt using a
new washer.
Tighten the drain bolt
securely.
TIGHTENING TORQUE:
17 lbf·ft (23 N·m, 2.3 kgf·m)
NOTICE
• Improper disposal of engine
oil can be harmful to the
environment. If you change
your own oil, please dispose
of the used oil properly. Put
it in a sealed container, and
take it to a recycling center.
Do not throw it in the trash,
pour it on the ground or
down a drain.
Advertisement
Table of Contents
