Table of Contents
Advertisement
4. With the outboard motor in a
vertical position, fill to the
upper limit mark on the
dipstick (P.93) with the
recommended oil.
Engine oil refill capacity:
Without oil filter change:
●
10.8 US qt (10.2 L)
With oil filter change: 11.0
●
US qt (10.4 L)
5. Install the oil filler cap and
tighten it securely.
6. Install and lock the engine
cover (P.92).
SERVICING YOUR OUTBOARD MOTOR
ENGINE OIL
RECOMMENDATIONS
Oil is a major factor affecting
performance and service life. Use
4-stroke detergent oil.
AMBIENT TEMPERATURE
®
Honda 10W-30 FC-W
motor oil is recommended for
general use.
®
FC-W
is a registered trademark
of the National Marine
Manufacturers Association.
If Honda 10W-30 FC-W oil is not
available, Honda recommends
that you use API service category
SG, SH, SJ or SL oil. The SAE oil
viscosity and service category are
in the API label on the oil
container.
LUBRICATION POINTS
Apply Honda Marine waterproof
grease to the parts shown below:
NOTICE
outboard
• Apply anticorrosion oil to
pivot surfaces where grease
cannot penetrate.
Apply Honda Marine Corrosion
Inhibitor (or equivalent) to all
areas under the engine cover and
any exposed metal surfaces
except the belts.
97
Advertisement
Table of Contents
