Engine stops or engine is
●
abnormal (overheating, low oil
pressure, etc.)
If the engine RPM or speed is
●
unstable
SHALLOW WATER
OPERATION
When operating in shallow water,
use the power trim/tilt switch (P.
70) to tilt the outboard motor so
that the propeller and gear case
won't hit the bottom.
Proceed at low speed, and
monitor water flow from the
cooling system indicator (P.48) to
be sure the outboard motor is
not tilted so high that the water
intakes are out of the water.
OPERATION
NOTICE
• An excessive trim/tilt angle
during operation can cause
propeller ventilation,
overheating, and water
pump damage. This type of
damage is not covered by
the Distributor's Limited
Warranty (U.S.) (P.151) /
Distributor's Warranty (CA.)
(P.164).
77