Table of Contents
Advertisement
11.After each spark plug is
seated, tighten it with the
spark plug wrench supplied in
the tool kit to compress the
sealing washer.
If reinstalling used spark
plugs, tighten 1/8 – 1/4 turn
after the spark plugs are
seated.
If installing new spark plugs,
tighten 1/2 turn after the
spark plugs are seated.
TIGHTENING TORQUE:
16 lbf·ft (22 N·m , 2.2 kgf·m)
NOTICE
• Loose spark plugs can
overheat and damage the
engine.
Overtightening the spark
plugs can damage the
threads in the cylinder head.
SERVICING YOUR OUTBOARD MOTOR
12.Push the wire connector onto
the ignition coil. Make sure it
locks in place.
13.Install the ignition coil.
Reinstall the bolt.
14.Repeat this procedure for the
other seven spark plugs.
15.Reinstall the covers. When
reinstalling the covers, make
sure not to pinch the wire
harnesses between the covers
and engine case.
Optional Spark Plug (Nickel)
RECOMMENDED SPARK PLUGS:
LZKAR7F11E (NGK)
NOTICE
• Incorrect spark plugs can
cause engine damage.
Replacement
Installation and removal
procedure of the optional spark
plugs are the same as the
standard spark plugs.
103
Advertisement
Table of Contents
