Table of Contents
Advertisement
STARTING THE ENGINE
• If the engine is not properly
warmed-up before raising the
engine speed, the warning buzzer
and overheat indicator may
activate and the engine speed will
be automatically reduced.
• The cooling system may freeze in
areas where the temperature
reaches 0°C (32°F) or below.
Cruising at high speed without
warming the engine up may
cause engine damage.
Before leaving the dock, check the
operation of the emergency stop
switch.
82
Station Select Mode
ACT INDICATOR
[-] SWITCH
PRESS and HOLD
For multiple station type, use the [-]
switch to change the operating
station.
If you press and hold the [-] switch of
the inactive station when all remote
control lever is in the NEUTRAL
position, you can operate the
outboard motors using this station.
A long buzz sounds once and the
ACT indicator comes on when the
station can be operated.
Advertisement
Table of Contents
