Table of Contents
Advertisement
OPERATION
BOW TOO LOW DUE TO
1. LOAD IN THE FRONT
2. OUTBOARD MOTOR TRIMMED
TOO LOW
BOW TOO HIGH DUE TO
1. LOAD IN THE REAR
2. OUTBOARD MOTOR TRIMMED
TOO HIGH
72
Trim Support Mode
POWER TRIM/TILT SWITCH
Press UP to
raise bow.
Press DN to
lower bow.
TRIM SPT. SWITCH
GEARSHIFT/THROTTLE
CONTROL LEVER
Pressing the TRIM SPT. switch
changes the mode to the trim
support mode, which
automatically does trim
operations according to the
speed or engine RPM.
Adjusting the trim angle to an
optimum position automatically
during acceleration or cruising
improves acceleration
performance, top speed, steering
stability, fuel efficiency, etc.
The conditions that control the
trim angle pattern is set in the
multi-function display.
The trim support switch (TRIM
SPT. switch) can be used
regardless of whether the boat is
stopped or cruising.
Advertisement
Table of Contents
