Water Separator Buzzer Sounds - HONDA marine BF350A Owner's Manual

TAKING CARE OF UNEXPECTED PROBLEMS
If water is flowing from the
cooling system indicator,
continue idling for 30 seconds. If
the cooling system is OK, the
overheat indicator should go off
within 30 seconds, and the
engine will respond normally to
throttle control lever operation.
If there is no water flowing from
the cooling system indicator, stop
the engine, and tilt the outboard
motor to inspect the water intake
screens. If restricted, clean the
water intake screens, return the
outboard motor to the running
position, restart the engine, and
check the cooling system
indicator again.
136
If there is still no water flowing
from the cooling system
indicator, or if the engine
protection system remains
activated after 30 seconds, return
to the nearest boat landing, and
have the outboard motor
inspected by an authorized
Marine dealer.
WATER SEPARATOR BUZZER
SOUNDS
WATER SEPARATOR
When the water separator buzzer
sounds (a rapid, repeating signal):
Check the water separator for
water contamination. If water is
present, stop the engine, and
clean the water separator
following the instructions on P.
106, or consult with an
authorized Honda Marine dealer.