Table of Contents
Advertisement
The power trim/tilt switch is
located on the gearshift/throttle
control lever. It is a rocker switch
with UP and DN (down) positions
for changing the angle of the
outboard motor.
You can use the power trim/tilt
switch anytime whether the boat
is underway, stopped, or the
ignition switch is in the OFF
position.
Trim the outboard motor to
obtain the best performance and
stability (P.69).
Tilt the outboard motor for
shallow water operation,
beaching, launching, or mooring.
For multiple outboard motors, tilt
them up at the same time.
PTT Switch Panel
POWER TRIM/TILT SWITCH PANEL
DUAL TYPE
POWER TRIM/TILT SWITCHES
TRIPLE TYPE
POWER TRIM/TILT SWITCHES
CONTROLS AND FEATURES
For multiple outboard motors,
the trim/tilt angle of all outboard
motors is adjusted at the same
time by using the power trim/tilt
switch on the gearshift/throttle
control lever and the trim/tilt
angle of each outboard motor is
adjusted by using each power
trim/tilt switch on the panel.
39
Advertisement
Table of Contents
