Moorage - HONDA marine BF350A Owner's Manual

OPERATION

Moorage

TILT LOCK LEVER (each side)
Tilt up the outboard motor using
the tilt lock levers when mooring
the boat. Shift the gearshift/
throttle control lever into the
NEUTRAL position and stop the
engine before tilting up the
outboard motor.
80
NOTICE
• Before tilting it up, leave the
outboard motor in the
running position for one
minute after stopping the
engine to drain the water
from inside the engine.
Stop the engine before tilting the
outboard motor.
1. Tilt the outboard motor up to
its highest position using the
power trim/tilt switch (P.38).
2. Move the tilt lock levers to the
LOCK position and lower the
outboard motor until the lock
levers contact the stern
bracket.
When tilted up to 65°
TILT LOCK LEVER (each side)
FREE
LOCK
When tilted up to 55°
TILT LOCK LEVER (each side)
LOCK
FREE