Table of Contents
Advertisement
REASONABLY FORESEEABLE MISUSE
The DMP machine must not be used for any purposes other than metal powder sintering.
Do not operate the machine outside the limits of operation of the machine (building volume, supply pressure...).
These are typical examples of machine misuse:
CYCLE
Do not start a job while warning message(s) is (are) still activated (see section "Manufacturing
menu" on page 43).
Building process
Do not start a job without cleaning the lens, or at least, controlling its cleanliness.
Do not start the lens cleaner blower while the process filter is not connected to the printer.
Do not try to open the front doors without pressing the key button at first (see section "Machine
preparation" on page 56).
At anytime
Do not move the carriage while the tamping plate or any other object is present in the
manufacturing chamber.
Do not fill the feeding piston with material without compacting several times. This may result in
bad compacting, thus short feeding hazard during the layerings.
Do not confirm the lens filter replacement warning message without actually replacing the filter.
Maintenance
The level of filter clogging impacts the quality of the sintering process.
3D SYSTEMS, INC.
DESCRIPTION
70
Advertisement
Table of Contents
