Cabinet Filter Replacement - 3D Systems ProX DMP 200 User Manual

3d production printer
Table of Contents

Advertisement

Cabinet filter replacement

The left door of the control/supply cabinet is equipped with filter that must be replaced every 6 months.
Parts required :
Part number 5007129C00 - quantity = 1.
Procedure:
1.
Open the left door of the cabinet.
2.
Remove the filter grid from the door.
3.
Replace the filter with the new one.
4.
Refit the filter grid on the door.
5.
Close the left door of the cabinet.
3D SYSTEMS, INC.
93

Advertisement

Table of Contents
loading

Table of Contents