3D Systems ProX DMP 200 User Manual page 43

Step 7 : Lens cleaning
Caution: to ensure process quality, it is important to clean the lens before each job . Consult the section
"Cleaning the laser optic system" on page 62 for details on how to clean the lens .
If no filter replacement required
1. Perform the actions (1). Consult the section
"Cleaning the laser optic system" on page 62
for details on how to clean the lens.
2. Click on Next (2) to go to the next step.
If filter replacement required
1. When the lens cleaner timer
60 days, the interface will at first prompt to
change the lens cleaner filter. Perform the actions
(1). Consult the Maintenance
on how to replace the filter).
3D SYSTEMS, INC.
value has reached
section for details
39
1
2
1