Table of Contents
Advertisement
Parts:
•
1x kit "Disposable Process Filter" (part number : 151605), including :
•
1x filter vessel in closed state, with closing set mounted on it: 2x clamps (1), 2x cover lids (2), 2x centering rings with
stand-off (3)
•
2x standard centering rings (4)
4
2
•
ADR stickers (European Agreement concerning the International Carriage of Dangerous Goods by Road). The
sticker must be applied on the filter vessel before shipping it to waste management.
- ADR 4.2: apply when filter is full with Ti fumes
- ADR 9: apply when filter is full with Ni or Co containing fumes
•
2x cover lids that have been kept aside during the used process filter installation. They will be used to close the filter
during the replacement. The procedure will indicate to store it for later use.
Caution: the clean filter vessel is filled with argon to avoid water condensation during transportation.
WARNING: OPEN NEW FILTER VESSEL ONLY AT THE MOMENT OF CONNECTION TO MACHINE . KEEP OPEN
TIME TO ABSOLUTE MINIMUM .
WARNING: ALWAYS LEAVE DIRTY FILTER VESSELS FIRMLY CLOSED AND MARK CLEARLY THAT IT CONTAINS
EX AND FLAMMABLE SOLIDS AND/OR ENVIRONMENTALLY HAZARDOUS SUBSTANCES USING THE PROVIDED
ADR LABELS . STORE DIRTY FILTER VESSELS IN A SAFE LOCATION WITHOUT THE RISK OF BEING DAMAGED
OR OPENED BY UNAUTHORIZED PEOPLE .
WARNING: DO NOT START THE LENS CLEANER BLOWER WHILE THE PROCESS FILTER IS NOT CONNECTED TO
THE PRINTER .
Tools:
•
Permanent marker
•
10mm wrench
•
5mm Allen wrench
3D SYSTEMS, INC.
1
73
3
Advertisement
Table of Contents
Need help?
Do you have a question about the ProX DMP 200 and is the answer not in the manual?
Questions and answers