Table of Contents
Advertisement
13. Clean the cover panel (inside and outside) with the use of damp cotton cloth to neutralize any presence of the
condensate (black particle aspect).
14. Clean the sides of the enclosure with the use of a damp cotton cloth to neutralize any presence of the condensate
(black particle aspect).
15. Remove any presence of powder on the enclosure with the use of a natural fiber brush and a vacuum cleaner.
16. Put back the cover panel and secure it by tightening the screws.
17. Gather the control/supply cabinet and the main cabinet together.
3D SYSTEMS, INC.
Metal particle
condensate
- Highly
combustible
83
Advertisement
Table of Contents
Need help?
Do you have a question about the ProX DMP 200 and is the answer not in the manual?