Receiver - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

12.2. Receiver

Rated Voltage
Operating Voltage Range
24V DC input
Rated Current
Consumption
12V DC input Main Unit
Ambient Operating Temperature
Ambient Operating Humidity
Storage Ambient Temperature
Storage Ambient Humidity
Mounting Location
Mounting Direction
Protection Rating
Environmental Conditions
Insulation Resistance
Withstand Voltage
Mass (Tolerance: ±10%)
External Dimensions
Terminal Block
Connector
Power supply
Input
Interfaces
Output
USB connector
Display Unit
10.8 to 26.4 VDC (21.6 to 26.4 VDC when LED unit or buzzer unit is installed)
Main Unit
LED Unit
Buzzer Unit
More than 5MΩ at 500 VDC between the live part and non-current carrying
500 VAC applied for 1 min between live part and non-current carrying
Supported
Single wire: φ 0.5 - 1.2 mm, Stranded wire: 0.2 - 1.5 mm
Wire Diameter
Non-Voltage
Contact Output
(NPN open collector)
Relay output
Contact rating: 30 VDC 3.0 A *1, minimum applicable load: 10.8 VDC 10 mA
(1 contact A)
Open/close life: 100,000 times or more *30 VDC 3.0 A resistive load
12 to 24 VDC (24 VDC when LED unit or buzzer unit is installed)
Maximum: 52 mA or less
Maximum: 42 mA or less (per tier)
Maximum: 42 mA or less
Maximum: 79 mA or less
-10°C to +50°C
85% RH or less, no freezing, no condensation
-20°C to +60°C
85% RH or less, no freezing, no condensation
IP 65 (IEC 60529), NEMA TYPE 4X,13
(IP54 when SZP-003W is mounted on the product body)
metallic part
metallic part without breaking insulation
220 g *Hexagon nut with flange (Accessory) not included
"4. Part Names and Dimensions" ( ☞ page 12)
Screwless Terminal Block (14 contacts)
12 to 24 VDC input (12 to 24 VDC, GND)
1 contact (Clear Input)
5 contacts (COM terminal 1 contact)
Maximum load voltage: 35 VDC, Maximum load current: 250 mA
USB 2.0 (Type-C connector)
*For maintenance only, do not use.
Status Display Indicator
86
12. Specifications
Indoors
Upright
Upright
2
1 contact
(AWG24-16)