One-Shot Mode - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.4.2. One-shot Mode

• This product can hold the output of the receiving product (hold output/output for 12 seconds) by pressing the ON
input when the transmitting product is emitting the OFF input.
• The output hold time can be set (hold output/output for 12 seconds) by the receiver's One-shot Mode output time setting.
• Read "7.2. About the DIP Switches and Reset Button" ( ☞ page 20) before handling the DIP switches.
Transmitter
Function
DIP Switch
OFF
ON
Repeater
Setting
Function
DIP Switch
OFF
ON
OFF
ON
Receiver
Setting
Function
DIP Switch
OFF
ON
OFF
ON
When it is set to output for 12 seconds and multiple inputs are received, outputs for 12 seconds from the timing
of the last input.
Due to wireless communication, the usage environment, and the number of repeaters, the timing of the output
may be delayed.
● During output, if one-shot output clear is performed or the power for the receiver is turned off, the output is stopped.
For information, refer to "7.4.2.1. One-shot Output Clear" ( ☞ page 28).
● For information on how to set One-shot Mode for the receiver/repeater, refer to "7.3.2.1. How to Set Functions" ( ☞ page 24).
ON
ON
ON Input
OFF Input
ON output
OFF output
ON output
12 seconds
OFF output
ON output
OFF output
ON output
12 seconds
OFF output
CAUTION
Point
27
ON ON
12 seconds
12 seconds
7. Operation