Patlite WIO-B1T Instruction Manual page 39

Wireless Control Unit
② When using a transmitter and receiver
Transmitter
Power on
Lemon light on
Flashing blue
Red light on
Light blue light on
Green light on
● After pairing is complete
Transmitter
Connection 1
*Connect in the order of connection 1, 2, 3, and 4.
Power on
Lemon light on
Red light on
Pink light on
Light blue light on
Green light on
* Depending on the installation environment and radio wave conditions,
the lighting and flashing status of the indicator may not transition as
shown in the figure.
Receiver
Pairing
Power on
Lemon light on
Flashing blue
Red light on
Green light on
Repeater 1
Connection 2
Power on
Lemon light on
Red light on
Pink light on
Green light on
* Depending on the installation environment and radio wave conditions,
the lighting and flashing status of the indicator may not transition as
shown in the figure.
Explanatory notes
Pairing
Start operation
Repeater 2
Connection 3
Power on
Lemon light on
Red light on
Pink light on
Green light on
Explanatory notes
* The relay operates output.
(Actual operation should be started after the receiver is connected.)
39
7. Operation
Repeater 3 Receiver
Connection 4
Power on Power on
Lemon light on Lemon light on
Red light on Red light on
Pink light on
Pink light on
Green light on Green light on
Start relay operation *
Start operation