Wireless Control Unit
7.6. How to Unpairing
• To delete the connection information (pairing information) registered for each product, such as adding/removing
a repeater or replacing the product for maintenance, cancel the pairing and then pairing again.
• Read "7.2. About the DIP Switches and Reset Button" ( ☞ page 20) before handling the DIP switches.
• To unpair, follow the procedure below.
❶
Confirm the product to unpair is turned off.
❷
Remove the head cover from the WIO body unit.
❸
Turn ON the Function DIP Switch 1 for the product
to unpair.
❹
Turn on the power of the product to unpair,
and confirm that the indicator repeatedly lights
up alternately red ↔ green.
• Do not turn off the power before the indicator lights up
alternately red ↔ green. Unpairing may fail.
• When unpairing is completed, the indicator repeatedly
alternates between red↔ green.
• If unpairing failed, the indicator flashes red. That may
indicate product failure. For information, refer to
"9. Troubleshooting" ( ☞ page 80).
❺
Turn off the power of the product to unpair,
and turn off Function DIP Switch 1.
❻
Attach the head cover to the WIO body unit.
Function DIP Switch
OFF
❺
❸
ON
❹
Red light on
(Light up Alternately)
Flashing red
33
7. Operation
❷
Head Cover
❻
WIO Body
Unit
Work
Green light on
complete
Operation
failed