Wireless Control Unit
7.12.2.5. Signal Light / Revolving Light
● RLR-M1
Receiver / Repeater
Output: CH1
Output: CH2
Output: CH3
Output: CH4
Output: CH5
COM (Output for CH1-5)
Input: Clear ⊕
Input: Clear ⊖
Output: CH6 ⊕
Output: CH6 ⊖
Power Supply Input 2
Power Supply Input 1
Power Supply Input 2
Power Supply Input 1
● SK-M1
Receiver / Repeater
Output: CH1
Output: CH2
Output: CH3
Output: CH4
Output: CH5
COM (Output for CH1 - 5)*
Input: Clear ⊕
Input: Clear ⊖
Output: CH6 ⊕
Output: CH6 ⊖
Power Supply Input 2
Power Supply Input 1
Power Supply Input 2
Power Supply Input 1
*Connect the COM terminal of the receiver
to power input 2.
③
④
⑤
Do not connect to CH1 - 5 output or to COM terminals
⑥
⑦
⑩
⑪
⑫
⑬
⑭
⑨
⑧
②
①
12 VDC *
Fuse
1A
*12 VDC recommended due to high inrush current
Connect 1:1 with the terminal
you want to control
③
④
⑤
⑥
⑦
⑩
⑪
⑫
⑬
⑭
⑨
⑧
②
①
Fuse
12 - 24 VDC
1A
69
Power Supply (Lead Wire: Black)
Power Supply (Lead Wire: White)
Buzzer (Lead Wire: Purple)
Power Supply (Lead Wire: Gray)
Power Supply (Lead Wire: Yellow)
7. Operation
RLR-M1 (DC model)
SK-M1 (DC model)