Wiring Example For Input Devices; Typical Wiring Example - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.12.1. Wiring Example for Input Devices

7.12.1.1. Typical Wiring Example

Wiring example for each type of external contact.
If you have any questions about a special application for this product, please contact our Technical Support
Center listed on our website.
Accidental wiring will result in product failure.
To both turn on and flash the lamp, prepare separate external contacts for turning the lamp on and for flashing the lamp.
● External contact classification: Contact relay
Transmitter
Do not apply voltage to any wire
other than the power.
⑭
Flashing COM
Input CH1 / LED Red
③
Input CH2 / LED Amber ④
⑤
Input CH3 / LED Green
⑥
Input CH4 / LED Blue
Input CH5 / LED White
⑦
⑩
Input: CH6
⑪
Input: Buzzer
⑫
COM
⑨
Power Supply Input (COM)
⑧
Power Supply Input
②
Power Supply Input (COM)
①
Power Supply Input
CAUTION
Fuse
12 - 24 VDC (Class 2) (No polarity)
1A
* 24 VDC when LED unit or buzzer unit is connected
55
7. Operation
Flashing/Buzzer
External Contact
Light on/Buzzer
External Contact