Patlite WIO-B1T Instruction Manual page 66

Wireless Control Unit
● LKEH-02FV
Receiver / Repeater
COM (Output for CH1-5)
Output: CH1
Output: CH2
Output: CH3
Output: CH4
Output: CH5
Output: CH6 ⊕
Output: CH6 ⊖
Input: Clear ⊕
Input: Clear ⊖
Power Supply Input 2
Power Supply Input 1
Power Supply Input 2
Power Supply Input 1
⑩
Connect 1:1 with the terminal
you want to control
③
④
⑤
⑥
⑦
⑬
⑭
⑪
⑫
⑨
⑧
②
①
Fuse 24 VDC
2A
66
Common Line (Lead Wire: Yellow)
Flashing Enable Common (Lead Wire: Brown)*1
Signal Tower Red (Lead Wire: Red)
Signal Tower Amber (Lead Wire: Orange)
Signal Tower Green (Lead Wire: Green)
Signal Tower Blue (Lead Wire: Blue)
Signal Tower White (Lead Wire: White)
Sound CH1 (Lead Wire: Cyan)
Sound CH2 (Lead Wire: Yellow)
Sound CH3 (Lead Wire: Pink)
Sound CH4 (Lead Wire: Light Green)
Sound / STOP (Lead Wire: Green)
Sound / Reduce Volume (Lead Wire: Purple)
BUSY⊕ (Lead Wire: Orange)*2
BUSY⊖ (Lead Wire: Blue)*2
Power Supply⊖ (Lead Wire: Black)
Power Supply⊕ (Lead Wire: White)
7. Operation
*1 The COM terminal of the
receiver/repeater can be
connected to the flashing
enable common line.
Cable (Gray)
Cable (Black)
*2 Do not connect the BUSY
terminal to the receiver
LKEH-02FV (DC model)