How To Use The Ac Adapter - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.11.6.2. How to Use the AC Adapter

❶
Connect the extension cable lead wires to
the power input terminal of this product.
ㅣ For information about power input terminal wiring,
refer to "7.11. Wiring" ( ☞ page 46) and
"7.12. Wiring Example" ( ☞ page 54).
❷
Connect the extension cable and AC adapter,
then tie them together with cable ties.
(To prevent disconnection of cables)
• Use care and avoid applying excessive force when
tying cables with cable ties.
❸
Assemble the AC plug with the AC adapter.
ㅣ Check if the AC plug assembly is secure.
ㅣ Do not work with wet hands or in dusty places.
Moisture or dust on the contacts may cause electric
shock or fire.
ㅣ Select and install an AC plug that matches the
outlet specifications.
❹
Plug the AC adapter into the power outlet.
ㅣ Periodically wipe away any dust and grime around
the AC plug. Failure to follow these instructions
could result in fire.
❸
Fit A and B together.
A
B
*The plug in the diagram indicates UL.
Work on the other AC plugs in the same manner.
Outlet
❹
AC Adapter
53
7. Operation
Push the AC plug in from above
while pulling the C section.
C
❶
Connect to this product
Lead Wire
(Red⊕ / Black⊖)
Extension cable
(Use only AC adapter [ADP-001])
❷
Cable tie