Mounting With Pole (Option) - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.10.3. Mounting with Pole (Option)

The following is an example installation using two circular brackets (SZP-003W: option) and Pole N.
❶
Rotate the WIO body unit counterclockwise and
detach from the direct mount bracket.
• Detach the bracket in the same way as the head cover described in
"7.13. How to Attach and Detach Additional Units" ( ☞ page 73).
❷
Attach the pole's water proof ring to the circular bracket.
❸
Insert the pole into the circular bracket.
• There is an insertion direction. Refer to the diagram to the right.
❹
Tighten the circular bracket from the top with the bind
tapping screws (3 x 12) (2 pieces).
Recommended Torque
❺
Attach the waterproof packing.
❻
Attach the direct mount bracket to the circular bracket.
❼
Tighten the circular bracket from the bottom with the
three hexagon nuts with flange.
Recommended Torque
❽
Attach the pole's water proof ring to the circular bracket.
❾
Insert the pole into the circular bracket.
• There is an insertion direction. Refer to the diagram to the right.
❿
Tighten the circular bracket from the bottom with the
bind tapping screws (3 x 12) (2 pieces).
Recommended Torque
⓫
Attach the waterproof packing.
⓬
Pass the wires through the circular bracket and pole.
• Make sure the wires can pass through the circular bracket
and pole before work.
⓭
Install the WIO body unit to the direct mount bracket
following the removal procedure in reverse order.
• Attach the bracket in the same way as the head cover described in
"7.13. How to Attach and Detach Additional Units" ( ☞ page 73).
The top case and
bottom case
cannot be
removed from the
indicator
0.8N・m
0.6 N・m
0.8N・m
44
❶
Terminal Block
Connector
Waterproof
gasket
❹
Hexagon Nut
with Flange
(M4)
❼
Binding Head Tapping
Screw (3 × 12)
❿
7. Operation
Head Cover
WIO Body Unit
Indicator
⓭
Direct Mount
Bracket
❻
❺
Binding Head Tapping
Screw (3 × 12)
Circular Bracket
Confirm that the two tabs are
on the outside
❷
Water-proof ring
for pole
Tab
❸❾
Pole
Confirm that the two tabs are
on the outside
❽
Water-proof ring
for pole
Circular Bracket
⓫
Waterproof gasket
⓬