Answerback - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.9. Answerback

A light blue indicator light for 1 second confirms that input information from the transmitter has successfully
transmitted to the receiver and that the output device has been operated on.
Input
* When the wireless quality is good
(flashes the color corresponding to the wireless quality status)
● Even if a repeater outputs, it does not answer back. The input information reaches the terminal receiver,
and an answer back is given at the stage of normal output.
● If signals are continuously input to the transmitter over a short period of time, the indicator on the receiver/transmitter
may not flash.
● In order to periodically check the communication, it may light up in light blue even if it is not an answerback.
Normal operation
Flashing green Flashing green
(for 2 seconds) (for 2 seconds)
Transmitter Repeater
Answerback
Light blue light on
(for 1 second)
Transmitter Repeater
Flashing green
(for 2 seconds)
Output
Receiver
Receiver
Point
41
7. Operation