Table of Contents
Advertisement
Wireless Control Unit
If additional unit does not attach properly to this product, confirm the tab of the cylinder-shaped part at the top of unit is
fitted correctly into the groove. Additionally, depending on how it is detached, the tab may come out of the groove when
detaching the additional unit from this product. Attaching while the tab is still in this state may cause damage.
If the unit does not attach properly to this product, try the following method.
・Turn the cylinder-shaped part in the middle of the bottom surface counterclockwise.
・Turn the cylinder-shaped part until it snaps into place, then attach it to this product.
CAUTION
Cylinder-shaped Part
Nameplate
Top View
Cannot Connect Condition
Cylinder-shaped Part
Nameplate
Top View
(Attachable)
Tab
Groove
Tab
Tab
Groove
Groove
Tab and Groove
Tab and Groove
75
7. Operation
Advertisement
Table of Contents
