Internal Circuit Diagram; Transmitter - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.11.5. Internal Circuit Diagram

7.11.5.1. Transmitter

③ Input: CH1/LED Red
④ Input:CH2/LED Amber
⑤ Input: CH3/LED Green
⑥ Input: CH4/LED Blue
⑦ Input: CH5/LED White
⑩ Input: CH6
⑪ Input: Buzzer
①⑧ Power input
②⑨⑫ Power input (COM)
● Signal Wire Contact Capacity (Recommended)
10 mA or more (without LED unit and buzzer unit connected)
Current Capacity
Withstand Voltage 35 V or more
Leakage Current 0.1mA or less
Fuse Fuse
Zener
Diode
*When LED unit is connected, Input 1 - 5: 100 mA or more *Per LED unit tier
*When buzzer unit is connected, Input buzzer: 300 mA or more
Internal
circuit
49
7. Operation
VCC
Photocoupler
GND