Wireless Control Unit
5.2. Specifications
• The transmitter has 7 inputs and the receiver/repeater has 5 transistor outputs and 1 relay output.
• You can attach additional units (LED units and buzzer unit) to this product.
For information on how to install additional units, refer to "7.13. How to Attach and Detach Additional Units" ( ☞ page 73).
When LED and buzzer units are attached, operate with an input voltage from 21.6 to 26.4 VDC.
LED Unit
Buzzer Unit
Input: 7 contacts
Transmitter
CAUTION
LED Unit
14
5. Product Overview
Buzzer Unit
・Transistor output
5 contacts
・Relay output
1 contact
Receiver / Repeater