Wireless Control Unit
7.12.2.6. Signal Tower
● LA6-D
Receiver / Repeater
Output: CH1
Output: CH2
Output: CH3
Output: CH4
Output: CH5
COM (Output for CH1 - 5)*1
Input: Clear ⊕
Input: Clear ⊖
Output: CH6 ⊕
Output: CH6 ⊖
Power Supply Input 2
Power Supply Input 1
Power Supply Input 2
Power Supply Input 1
*1 Short-circuit the receiver/repeater's
COM terminal and power input 2
● LR10-02
Receiver / Repeater
Output: CH1
Output: CH2
Output: CH3
Output: CH4
Output: CH5
COM (Output for CH1-5)
Output: CH6 ⊕
Output: CH6 ⊖
Input: Clear ⊕
Input: Clear ⊖
Power Supply Input 2
Power Supply Input 1
Power Supply Input 2
Power Supply Input 1
Connect 1:1 with the terminal
you want to control
③
④
⑤
⑥
⑦
⑩
⑪
⑫
connect either
⑬
⑭
⑨
⑧
②
①
Fuse
24 VDC
1A
Connect 1:1 with the terminal
you want to control
③
④
⑤
⑥
⑦
⑩
⑬
⑭
⑪
⑫
⑨
⑧
②
①
Fuse
24 VDC
1A
72
Signal Input Terminal Block
①
LED Tier 1 / Input 1 (Lead Wire: Red)
②
LED Tier 2 / Input 2 (Lead Wire: Orange)
③
LED Tier 3 / Input 3 (Lead Wire: Green)
④
LED Tier 4 / Input 4 (Lead Wire: Blue)
⑤
LED Tier 5 / Input 5 (Lead Wire: White)
⑥
Buzzer 1 / Input 6 (Lead Wire: Purple)
⑦
Buzzer 2 / Input 7 (Lead Wire: Cyan)
⑪
Switch Mode (Lead Wire: Pink)
⑨
Flashing/Pulse Enable Common (Lead Wire: Brown)*2
Power Supply (Lead Wire: Gray)
⑧
⑩
Power Supply (Lead Wire: Yellow)
*2 It is also possible to connect by replacing
the COM terminal of the receiver / repeater
with a flashing common wire
In this case, release the connection between
the receiver's COM terminal and power input 2
Lead Wire
⑨
LED Red (Lead Wire: Red)
⑥
LED Amber (Lead Wire: Orange)
④
LED Green (Lead Wire: Green)
②
LED Blue (Lead Wire: Blue)
③
LED White (Lead Wire: White)
⑩
Buzzer (Lead Wire: Purple)
⑪
Pattern 1 (Lead Wire: Pink)
⑫
Pattern 2 (Lead Wire: Cyan)
⑤
Common Line (Lead Wire: Yellow)
①
Flashing Enable Common (Lead Wire: Brown)*
⑧
Power Supply (Lead Wire: Gray)
⑦
Power Supply (Lead Wire: Black)
* It is also possible to connect the COM
terminal of the receiver/repeater to
the flashing enable common line.
7. Operation
LA6-D (DC model)
LR10-02 (DC model)