Indicator Display Examples; From Power-On To Start Of Operation - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.8.1. Indicator Display Examples

7.8.1.1. From Power-on to Start of Operation

● Before pairing (factory default and after unpairing)
① When using a transmitter, receiver, and repeater (3 units)
Transmitter
Pairing 1
Power on
Lemon light on
Flashing blue
Red light on
Pink light on
Light blue light on
Green light on
* Depending on the installation environment and radio wave conditions,
the lighting and flashing status of the indicator may not transition as
shown in the figure.
Repeater 2
Repeater 1
Pairing 2
Power on
Lemon light on
Blue light on Power on
Red light on Lemon light on
Flashing blue Blue light on
Red light on Red light on
Pink light on Flashing blue
Red light on
Pink light on
Green light on Green light on
38
Repeater 3
Pairing 3
Pairing 4
Power on
Lemon light on
Blue light on
Red light on
Flashing blue
Red light on
Pink light on
Green light on
Explanatory notes
Pairing
Start relay operation *
Start operation
* The relay operates output.
(Actual operation should be started after the receiver is connected.)
7. Operation
Receiver
Power on
Lemon light on
Blue light on
Red light on
Pink light on
Green light on