List Of Functions For The Function Dip Switch (Transmitter); List Of Functions For The Function Dip Switch (Receiver) - Patlite WIO-B1T Instruction Manual

Wireless Control Unit

7.3.2.2. List of Functions for the Function DIP Switch (Transmitter)

Switch Number Function Name
1 Unpairing
Level Mode /
2
One-shot Mode
3 Input logic switching

7.3.2.3. List of Functions for the Function DIP Switch (Receiver)

Switch Number Function Name
1 Unpairing
One-shot Mode
2
output time*
3 Not used
* This is valid only when the transmitting product is set to one-shot mode.
If the Function DIP switch is changed during operation (when the power is turned on), the setting is not reflected.
After setting the Function DIP switch, turn the power OFF→ON or press the reset button on the main unit to reflect the setting.
You cannot set functions channel by channel. All input channels and all output channels have common settings.
Operation
OFF: Disabled (factory default)
ON: Execute unpairing
OFF: Level Mode (factory default)
ON: One-shot Mode
OFF: Input logic A (factory default)
ON: Input logic B
Operation
OFF: Disabled (factory default)
ON: Execute unpairing
OFF: Output for 12 seconds
(factory default)
ON: Hold output
(Factory default: OFF)
CAUTION
Reset Button
(Reboot Main unit)
Switch for unpairing.
Do not use when operating.
Specify whether the input is detected at
level (input ON or OFF) or at one-shot (rising
ON from OFF).
Specify input logic A or B.
Switch for unpairing.
Do not use when operating.
Specifies the output time in One-shot Mode.
–
Do not use.
25
7. Operation
Description
Description