Mitsubishi Electric MELSEC iQ-R Series User Manual page 35

If the count condition and trigger condition are satisfied simultaneously, the count time is added and output to the file, then
cleared to 0.
Sampling interval
Count condition (Data
comparison)
Trigger condition
(Data comparison)
Count time 0
Output value
When the trigger logging condition is satisfied, the total time can also be output without clearing the count time.
The count time is added even after the trigger logging conditions are satisfied and total count is saved to the SD memory card.
When clearing the total time, clear the total number of times/total time operation of the data logging diagnostics.
Sampling interval
Count condition
(Data comparison)
Trigger condition
(Data comparison)
Count time 2000
Output value 2000ms
Count
10ms
File output File output File output
Count period
0 10
Count
10ms
File output File output File output
Count period
2000 2010
Count Count Count
File output File output File output
20 30 0
40ms
Count Count
File output File output File output
2020 2030 2030
2030ms
ON
OFF
ON
OFF
0
ON
OFF
ON
OFF
2030
1 FUNCTION
1.1 Data Logging Function
1
33